
The following Price Lists are available for Tank Gauge and Alarm Products.Please note that these are End User (Retail) Prices.
Wholesale discounts for Service/Installation Contractors and Major Companies are available. Please contact us for information and discount codes.!

Intelligent Stand Alone Capacitance Level Gauge. CSA 22.2 Approved.Standard Lengths from 6in (15.25cm) to 19ft (5.8m) [19ft (5.8m) to 40ft (12.2m) available on special order].
Probe with no moving parts contained in rigid casing with 1 1/4in (3.18cm) MNPT Connector.
Probe / Body / Casing Manufactured from 316 Stainless Steel/ Teflon.
Operating Temperature +120°F (50°C) to -40° (-40°C).
Low Power Useage - suitable for battery operation 12vdc to 28vdc.
Multiple Fluid operation including water and non-conductive fluids, Bitumen, Butane*, Diesel, Ethanol, Gasoline, Jet Fuel, Kerosene, Lube Oil, Methanol, Propane*, Saline Solutions, Etc. Consult Factory for Specific Applications.
* Require optional pressure probe.Explosion Proof Zone 1 Division 1 Clases B, C & D.
Options to Stand Alone Gauge
Display at Tank - 4 Segment bright LED Display.Relay Board /w 4 standard Signal Relays, Form A Normally Open or Normally Closed, 120mA 300v AC/DC with 4 trip points for overfill, high, low level alarm, motor, pump, signal or valve operation.
Relay Board Upgrade 8A, 80A surge (requires standard relay board).
Temperature and Water Option.
RS 485 Communications.
PC Software Options.
PC Interface Options.
Pressure Vessel Probe Option (High pressure up to 3000psi).
24 Hour Help Desk /w 12 months unlimited Telephone Support
12 Months return to factory repair or replacement Warranty.
Designed and manufactured in Canada!

This "highly visible" gauge is recommended for use when mounting close to a tank wall and for tanks with baffles or other obstructions. Direct mechanical action, reliable construction and "high visibility" make this gauge the perfect choice for tanks with depths up to 12 feet. Patented calibration assembly withstands pressure of 70 lbs.P.S.I.
Double Plastic Dome is almost indestructable.
Gallon Readout available for standard 275 gal. oval tanks.
All internal tank parts available in stainless steel.
Repair parts available

The Gauge Guard for above

Protect your Therma Guage against the elements or breakage. Rugged metal, coated bright red for immediate visibility.
Alarm for above

Loud Audible Alarm
Easy installation
Set for high level, low level or leak detection alarm
Lithium battery
Can add on existing gauges
Weather resistant
Remote options available

The mecoAlarm is an inexpensive battery operated, Intrinsically Safe Overfill Alarm offering the following features Certified Intrinsically Safe to ANSI/UL 913.
Meets NFPA 30A, UL 2244 and UFC Requirements.
Assists in Overfill Prevention.
Loud (100 db) Pulsating Alarm to alert the operator when the product level reaches the preset level.
9 VDC Battery Powered (Battery not included. Lithium battery is recommended in all installations for extended life.)9 V Alkaline for -4° to +130° F operation. No Power consumption in the "Non-alarm" condition provides years of life from a Lithium Battery.
9 V Lithium for -40° to +158° F Operation
Ultra low power consumption after Alarm reset.
Ultralife® 9 V Lithium batteries available at Radio Shack.
Use on protected or standard tanks.
Easy field retrofitt. No conduit required.
Optional connections fo 12 V Intrinsically Safe line power supply.
Single push button switch for test before filling tank and to reset Audible Alarm after the high level alarm point is reached.
Adjustable Float Switch to accomodate a wide range of high level alarm point settings.
Float Switch adjustment range is from 12 to 20 inches. Further adjustments can be accomplished using pipe nipples.
The mecoAlarm case has provision inside the cover for wall mounting. This means the case (Alarm) can mounted up to 500 feet from the float switch assembly, utilizing conduit and wiring.Price List: MIS 08
![]()
This Page was created/updated April 12, 2002 by-G Herb Barge
National Parts Distributing Ltd - contact us at eri@npdl.com