Meaurement Technology International Ltd. manufactures the EL6.0 Retrofit Temperature Compensated Pump/Dispenser Register.

---

The EL6.0 Eliminator Retrofit Temperature Compensated Register

Eliminator EL6.0 /w Remote Programmer

The EL6.0 has these important features not found on any other register:

• Automatic Calibration of the Register- so it will work with any meter currently on the market that has an output shaft or quadrature pulse outputs; any size of meter from 1/2" (127mm) to 8" (2032mm) or larger. The auto-calibration feature allows the installer to run only one "reference" amount in order to achieve the required meter calibration.

• Customizable Display - for multiple arrangements to suit the application wether it be retail, commercial or bulk.

• Back-lit LCD Displays - The LCD Display modules are rated for harsh climates (-40°C to +80°C or -40°F to "+1"76°F).The displays utilize a design that works with it without ambient light so they are visible with or without back light.

• Intrinsically Safe - The entire unit is intrinsically safe and rated for Class 1, Division 1, Group D areas..

• Not limited on Price per Unit - The Eliminator 6.0 is not limited to any set amount on the price per unit display (there is not limit of $2.00 per gallon for example). It can display in any unit of measure without any modification or optional accessories. All customer programming and daily operations, including changes to pricing and reading daily totals, can be done with an infrared remote control which works up to 30 feet (9m)..

• Automatic Temperature Compensation - is built in and can be used if desired with the appropriate probes and hardware.

• On-Screen Displays - All features are prompted by "user friendly" on screen displays. All on-screen prompts are in English, without cryptic numbers. Other language versions can be made available upon request.

• Access of Functions - Functions can be accessed by each user on a password basis. There are passwords for each of the different levels of functions. the following features are accessed by password:

• Price Change

• Reading Totalizers

• General Programming

• Audited Programming

• Sealable Audit Features - The audit features in programming are sealable so any metro logical data meets government Weights and Measures requirements.

• Accurate - three (3) decimal resolution on volume display.

• Customer Preset - Optional "Pump Mount" Customer Preset Keypad is available.

Functionality

The Eliminator 6.0 has only three electronic boards, meaning less serviceability problems and fewer parts to stock.

All setup configurations are standard. A standard computer chip is available for dispensing gasoline and diesel products with English Displays. Other product table and language chips are available.

What does this mean for you?

The same register has the functionality to work in a retail dispenser, a commercial dispenser, or on bulk rack applications. Displays can be programmed to show price for retail, no price for commercial and compensated and gross volumes for bulk applications. Other display configurations are available.

The Eliminator 6.0 can also be used in propane, natural gas and aviation fuel applications.

Specifications

Input Voltage:

110/220 VAC, 50-60Hz, .2/.1A

Motor Control Output:

12A@220 Volts side A, 3/4 HP
12A@220 Volts side B, 3/4 HP

Solenoid A, B fast and slow:

2A, 220 VAC

Handle Switch A, B:

5A, 220 VAC

Approved by

Download a EL6.0 Brochure in PDF format - Click "Here"

Download EL6.0 Selection Order Sheet "Here"

---

EL6.0BR Bulk Register - Meter and Remote Mount

MTI EL6.0BR Bulk Register

---

OEM Kits for New Dispenser Installations

Measurement Technology International Ltd. manufactures kits for Original Equipment Manufacturers for installation in their own Dispenser housings, such as the Dual kit for a Compressed Natural Gas Dispenser shown below...

For Information and Quotations contact our Mark Thompson at markt@npdl.com